C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mix Ratio By Volume | 1A:2B | N/A (gram scale required) |
| Pot Life | 2 minutes | 10 minutes |
| Cure Time | 4 hours | 45 minutes |
| Shore D Hardness | — | 50 |
| Specific Volume | 115 cu. in./lb. | 24.1 cu. in./lb. |
| Color | White | Black |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FlexFoam-iT!™ 15 Tuff Stuff SLOW | TASK™ 14 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 800 cps |
| Mix Ratio By Volume | 1A:2B | — |
| Mix Ratio By Weight | 100A:185B | 100A:120B |
| Pot Life | 2 minutes | 10 minutes |
| Handling Time | 90 minutes | — |
| Cure Time | 4 hours | 45 minutes |
| Shore D Hardness | — | 50 |
| Expansion (approximate) | 4 times | — |
| Foam Density | 15 lb/ft³ | — |
| Specific Gravity | 0.24 g/cc | 1.15 g/cc |
| Specific Volume | 115 cu. in./lb. | 24.1 cu. in./lb. |
| Color | White | Black |
| Tensile Strength | — | 1,800 psi |
| Elongation @ Break | — | 125 % |
| Shrinkage | — | 0.0035 in. / in. |
Product Description
FlexFoam-iT!™ 15 Tuff Stuff SLOW
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. FlexFoam-iT!™ foams are also used as repair materials for seats, cushions and archery targets. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties. The lower the number, the more the foam expands.
TASK™ 14
TASK™ 14 is a fast setting two-component urethane that cures quickly to black semi-rigid plastic. TASK™ 14 offers a longer pot life (10 minutes) and demold time of 45 minutes.
With a Shore value of 50D, these semi-rigid plastics are used for a variety of industrial applications including fast mold making, fast model duplication, prototyping, durable miniatures, black props and special effects, or making parts that are impact resistant. Fully cured castings are tough, durable and chemical resistant.
For Best Results… Do not cast TASK™ 14 into platinum cure (addition cure) silicone molds.