C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 35,000 cps |
| Mix Ratio By Volume | 1A:2B | N/A (gram scale required) |
| Pot Life | 2 minutes | 60 minutes |
| Cure Time | 4 hours | 16 hours |
| Shore A Hardness | — | 40 |
| Specific Volume | 115 cu. in./lb. | 25.6 cu. in./lb. |
| Color | White | Water Clear Translucent |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FlexFoam-iT!™ 15 Tuff Stuff SLOW | SORTA-Clear™ 40 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 35,000 cps |
| Mix Ratio By Volume | 1A:2B | — |
| Mix Ratio By Weight | 100A:185B | 100A:10B |
| Pot Life | 2 minutes | 60 minutes |
| Handling Time | 90 minutes | — |
| Cure Time | 4 hours | 16 hours |
| Shore A Hardness | — | 40 |
| Expansion (approximate) | 4 times | — |
| Foam Density | 15 lb/ft³ | — |
| Specific Gravity | 0.24 g/cc | 1.08 g/cc |
| Specific Volume | 115 cu. in./lb. | 25.6 cu. in./lb. |
| Color | White | Water Clear Translucent |
| Die B Tear Strength | — | 120 pli |
| Tensile Strength | — | 800 psi |
| Elongation @ Break | — | 400 % |
| 100% Modulus | — | 90 psi |
| Shrinkage | — | <.001 in. / in. |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 450 °F |
Product Description
FlexFoam-iT!™ 15 Tuff Stuff SLOW
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. FlexFoam-iT!™ foams are also used as repair materials for seats, cushions and archery targets. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties. The lower the number, the more the foam expands.
SORTA-Clear™ 40
SORTA-Clear™ Series rubbers are premium water clear translucent silicone rubbers (platinum catalyst) which cure at room temperature with negligible shrinkage. This product requires a gram scale for measuring parts A + B. SORTA-Clear™ 40 comes in Shore 40A hardness and features high tensile and tear strength.
SORTA-Clear™ silicones are ideal for making prototype, jewelry or other molds of any configuration where model visibility is important (i.e. extracting a model from the mold via cutting). Materials such as urethane, epoxy or polyester resins can then be cast into SORTA-Clear™ silicone without application of a release agent. Other materials such as wax and low melt metal alloys can also be cast into SORTA-Clear™. SORTA-Clear™ can be pigmented with SILC Pig™ silicone pigments.
SORTA Clear™ 40 silicone rubber is FOOD SAFE and can be used for culinary applications including casting chocolate and other confections.
Certified Skin Safe - Cured SORTA Clear™ 40 is skin safe and certified by an independent laboratory.