SORTA-Clear™ Series rubbers are near-clear translucent silicone rubbers (platinum catalyst) which cure at room temperature with negligible shrinkage and feature high tensile and tear strength. These silicones are often used to make one-piece cut block molds where the original model is extracted by cutting. A variety of materials (such as wax, gypsum, resins, etc.) can be cast into molds made with Sorta-Clear™ silicones.
SORTA-Clear™ 18, SORTA-Clear™ 37 and SORTA-Clear™ 40 are certified food safe and can be used for culinary applications including casting chocolate and other confections.
SORTA-Clear™ 18 is certified skin safe and can be used to create medical devices, prosthetics and other skin-contact appliances.
Ideal for making prototype, jewelry or other molds of any configuration where model visibility is important (i.e. extracting a model from the mold via cutting). SORTA-Clear™ 18 and 40 require a gram scale for measuring.
SORTA-Clear™ 18, 37, and 40 silicones are suitable for making molds for baking, casting ice, butter or chocolate and other applications used to produce food.
|Select a Product Below||Mix Ratio By Volume||Mix Ratio By Weight||Hardness||Pot Life||Cure Time|
|› SORTA-Clear™ 12||1A:1B||1A:1B||12 A||40 mins||12 hrs|
|› SORTA-Clear™ 18||–||100A:10B||18 A||60 mins||24 hrs|
|› SORTA-Clear™ 37||1A:1B||1A:1B||37 A||25 mins||4 hrs|
|› SORTA-Clear™ 40||–||100A:10B||40 A||60 mins||16 hrs|
Learn how to make a unique handcrafted edible treat using food-safe silicone SORTA-Clear 37
In this video, we show how food-safe Sorta-Clear™ 37 silicone is used to make a mold for pouring candies.
One of the most common questions we're asked is how to create a mold from an original model that has a pass-through.
A squish mold is ideal for thin-walled castings like a model car body.
A two-part mold is made of a flintlock pistol trigger guard using SORTA-Clear® 37 Silicone for the lost-wax process.
This tutorial shows how to make a one piece silicone mold out of a transparent silicone.
How to make a mold to pour your own lollipops
Milo Shows How To Make a Silicone Mold for Ice Shot Glasses
Make your resin casting look like granite, sandstone, limestone or more
Join Milo as he makes a mold of a complicated skull model.
Moen uses the full spectrum of Smooth-On tin and platinum-based silicone rubbers to develop and refine proposed design
Nelson Maniscalco and Marty Shemella are highly skilled in reproducing detailed fossils and skeletons.
When Karl Denton was chosen to create a plaque for the 1928 Scarab Club costume ball, he had a very unique design in mind.