C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 370 cps | 800 cps |
| Mix Ratio By Volume | N/A (gram scale required) | 1A:1B |
| Pot Life | 12 hours | 7 minutes |
| Color | Clear | Tan |
| Tensile Modulus | 378,000 psi | 146,000 psi |
| Compressive Modulus | 82,000 psi | 65,000 psi |
| Shrinkage | 0.007 in. / in. | 0.0031 in. / in. |
| Heat Deflection Temp | 100 °F | 162 °F |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| EpoxAcast™ 692 Deep Pour | TASK™ 6 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 370 cps | 800 cps |
| Mix Ratio By Volume | — | 1A:1B |
| Mix Ratio By Weight | 100A:40B | 1A:1B |
| Pot Life | 12 hours | 7 minutes |
| Handling Time | — | 75 minutes |
| Cure Time | — | 24 hours |
| Shore D Hardness | 80 | 75 |
| Specific Gravity | 1.08 g/cc | 1.07 g/cc |
| Specific Volume | 25.7 cu. in./lb. | 25.9 cu. in./lb. |
| Color | Clear | Tan |
| Tensile Strength | — | 5,200 psi |
| Tensile Modulus | 378,000 psi | 146,000 psi |
| Ultimate Tensile | 4,585 psi | — |
| Tensile Elongation | 3.1 % | — |
| Elongation @ Break | — | 4 % |
| Compressive Strength | 5,777 psi | 5,570 psi |
| Compressive Modulus | 82,000 psi | 65,000 psi |
| Flexural Strength | 6,780 psi | 6,200 psi |
| Flexural Modulus | 203,000 psi | 182,500 psi |
| Shrinkage | 0.007 in. / in. | 0.0031 in. / in. |
| Heat Deflection Temp | 100 °F | 162 °F |
| Index of Refraction at 20°C | 1.5372 | — |
Product Description
EpoxAcast™ 692 Deep Pour
EpoxAcast™ 692 Deep Pour is an UV resistant clear casting epoxy resins suitable for a variety of industrial and art related projects requiring a rigid, clear finished casting. EpoxAcast™ 692 features a very low viscosity for easy mixing and minimal bubble entrapment. Castings cure with negligible shrinkage and are very hard and strong. Resin can be colored with UVO™ or IGNITE™ colorants. Cast Magic™ and Glow Worm™ powders can also be added to create amazing casting effects.
TASK™ 6
TASK™ 6 low cost, high performance casting resin yields castings that are tan and virtually bubble free. This resin offers superior physical and performance properties compared to our popular Smooth-Cast™ Series of general purpose casting resins. Vacuum degassing is not necessary and it offers the convenience of a 1A:1B by volume or weight mix ratio.
TASK™ 6 has high tensile and flexural strength, as well as high flexural modulus. This plastic was formulated for a variety of industrial applications including pattern making and making prototype models. This resin is designed for casting in thicknesses up to ½” (1.27 cm).