Product Type |
|
|
Mixed Viscosity | 23,000 cps | 150 cps |
Pot Life | 8 minutes | 20 minutes |
Shore D Hardness | — | 80 |
Shore A Hardness | 10 | — |
Color | Translucent | White |
Tensile Strength | 475 psi | 6,650 psi |
Elongation @ Break | 1,000 % | 6 % |
Dragon Skin™ 10 FAST | TASK™ 3 | |
---|---|---|
Product Type |
|
|
Mixed Viscosity | 23,000 cps | 150 cps |
Mix Ratio By Volume | 1A:1B | 1A:1B |
Mix Ratio By Weight | 1A:1B | 115A:100B |
Pot Life | 8 minutes | 20 minutes |
Cure Time | 75 minutes | 90 minutes |
Shore D Hardness | — | 80 |
Shore A Hardness | 10 | — |
Specific Gravity | 1.07 g/cc | 1.12 g/cc |
Specific Volume | 25.8 cu. in./lb. | 24.7 cu. in./lb. |
Color | Translucent | White |
Die B Tear Strength | 102 pli | — |
Tensile Strength | 475 psi | 6,650 psi |
Tensile Modulus | — | 290,000 psi |
Elongation @ Break | 1,000 % | 6 % |
100% Modulus | 22 psi | — |
Compressive Strength | — | 8,300 psi |
Compressive Modulus | — | 78,000 psi |
Flexural Strength | — | 9,500 psi |
Flexural Modulus | — | 288,000 psi |
Shrinkage | <.001 in. / in. | 0.0025 in. / in. |
Heat Deflection Temp | — | 134 °F |
Useful Temperature (min) | -65 °F | — |
Useful Temperature (max) | 450 °F | — |
Dielectric Strength | >350 volts/mil | — |
Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C)
TASK™ 3 low viscosity, high performance casting resin offers superior physical and performance properties compared to our popular Smooth-Cast™ Series of general purpose casting resins. Vacuum degassing is not necessary and it offers the convenience of a 1A:1B by volume (115A:100B by weight) mix ratio.
TASK™ 3 is white. It has high tensile and flexural strength, as well as high flexural modulus. This plastic was formulated for a variety of industrial applications including pattern making and making prototype models. This resin is designed for casting in thicknesses up to ½” (1.27 cm). TASK™ Plastics are moderately priced and are available in trial kits, one-gallon, five-gallon, 55-gallon drum and totes.