C
mpare
T
l
Add Material to Compare
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 9,300 cps | 5,000 cps |
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 15 minutes | 3 hours |
| Barcol 935 Hardness | — | 93 |
| Shore A Hardness | 000-35 | — |
| Specific Volume | 28 cu. in./lb. | 18.22 cu. in./lb. |
| Color | Translucent | Black |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Ecoflex™ GEL | EpoxAcast™ 650 BLACK + HT Hardener | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 9,300 cps | 5,000 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 1A:1B | 100A:10B |
| Pot Life | 15 minutes | 3 hours |
| Cure Time | 2 hours | Twenty Four Hours Followed By Post Cures |
| Barcol 935 Hardness | — | 93 |
| Shore A Hardness | 000-35 | — |
| Specific Gravity | 0.98 g/cc | 1.52 g/cc |
| Specific Volume | 28 cu. in./lb. | 18.22 cu. in./lb. |
| Color | Translucent | Black |
| Tensile Modulus | — | 1,079,000 psi |
| Ultimate Tensile | — | 6,900 psi |
| Tensile Elongation | — | 0.82 % |
| Elongation @ Break | >1000 % | — |
| Compressive Strength | — | 15,980 psi |
| Compressive Modulus | — | 134,000 psi |
| Flexural Strength | — | 10,850 psi |
| Flexural Modulus | — | 775,000 psi |
| Shrinkage | <.001 in. / in. | 0.007 in. / in. |
| Heat Deflection Temp | — | 187 °F |
| Refractive Index | 1.40451 | — |
Product Description
Ecoflex™ GEL
Ecoflex™ GEL is an extremely soft, platinum silicone rubber gel specifically designed for creating silicone makeup appliances, for cushioning, creating gaskets, encapsulation, and other applications requiring a very soft silicone material.
Certified Skin Safe - Cured Ecoflex™ GEL is skin safe and is certified by an independent laboratory.
EpoxAcast™ 650 BLACK + HT Hardener
EpoxAcast™ 650 Black is a mineral filled general purpose casting epoxy that is low cost and versatile. It features a low mixed viscosity for minimal bubble entrapment.EpoxAcast™ 650 Black is used for making hard dies for metal stamping as well as patterns and fixtures. It is also used for electrical encapsulation to extend the life cycles and enhance the performance of potted electronic devices. The high compressive strength of EpoxAcast™ 650 Black makes it ideal for making stamping dies for production pressing of metal ornaments.