C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 35,000 cps | Light Paste |
| Cure Time | 4 hours | 16 hours |
| Barcol 935 Hardness | — | 87 |
| Shore D Hardness | — | 85 |
| Shore A Hardness | 37 | — |
| Specific Volume | 25.6 cu. in./lb. | 19.4 cu. in./lb. |
| Color | Water Clear Translucent | Neutral |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| SORTA-Clear™ 37 | EpoxAcoat™ NEUTRAL | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 35,000 cps | Light Paste |
| Mix Ratio By Volume | 1A:1B | 5A:1B |
| Mix Ratio By Weight | 1A:1B | 100A:15B |
| Pot Life | 25 minutes | 20 minutes |
| Thin Film Working Time | — | 40 minutes |
| Thin Film Recoat Time | — | 60 minutes |
| Tack Free Time | — | 4 hours |
| Cure Time | 4 hours | 16 hours |
| Barcol 935 Hardness | — | 87 |
| Shore D Hardness | — | 85 |
| Shore A Hardness | 37 | — |
| Specific Gravity | 1.08 g/cc | 1.43 g/cc |
| Specific Volume | 25.6 cu. in./lb. | 19.4 cu. in./lb. |
| Color | Water Clear Translucent | Neutral |
| Die B Tear Strength | 105 pli | — |
| Tensile Strength | 600 psi | — |
| Ultimate Tensile | — | 26,000 psi |
| Elongation @ Break | 400 % | — |
| 100% Modulus | 90 psi | — |
| Compressive Strength | — | 24,000 psi |
| Flexural Strength | — | 30,000 psi |
| Shrinkage | <.001 in. / in. | 0.00015 in. / in. |
| Heat Deflection Temp | — | 133 °F |
Product Description
SORTA-Clear™ 37
SORTA-Clear™ Series rubbers are premium water clear translucent silicone rubbers (platinum catalyst) which cure at room temperature with negligible shrinkage. SORTA-Clear™ 37 has Shore 37A hardness and features high tensile and tear strength. This product also offers the convenience of a 1A:1B by volume mix ratio.
SORTA-Clear™ silicones are ideal for making prototype, jewelry or other molds of any configuration where model visibility is important (i.e. extracting a model from the mold via cutting). Materials such as urethane, epoxy or polyester resins can then be cast into SORTA-Clear™ silicone without application of a release agent. Other materials such as wax and low melt metal alloys can also be cast into SORTA-Clear™. SORTA-Clear™ can be pigmented with SILC Pig™ silicone pigments.
SORTA Clear™ 37 silicone rubber is FOOD SAFE and can be used for culinary applications including casting chocolate and other confections.
Certified Skin Safe - Cured SORTA Clear™ 37 is skin safe and certified by an independent laboratory.
› Click here for more SORTA-Clear™ silicone products.
EpoxAcoat™ NEUTRAL
EpoxAcoat™ RED, GREY, WHITE and NEUTRAL are thixotropic epoxy gel coats which are widely used for hand laminating and tooling applications. They are tough and strong surface coat resins which cure at room temperature and offer exceptional abrasion resistance. EpoxAcoat™ NEUTRAL is formulated “color neutral” specifically for adding color pigments and fillers. For high temperature applications (to 284°F / 140°C) use EpoxAcoat HT™ (see separate technical bulletin).