C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 350 cps | 1,000 cps |
| Mix Ratio By Volume | 2A:1B | N/A (gram scale required) |
| Pot Life | 10 minutes | 30 seconds |
| Cure Time | 3.5 hours | 2 hours |
| Shore D Hardness | 80 | — |
| Specific Volume | 25.1 cu. in./lb. | 420 cu. in./lb. |
| Color | Clear (Slightly Yellow In Thick Sections) | White |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| XTC-3D™ | FlexFoam-iT!™ IV Tuff Stuff | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 350 cps | 1,000 cps |
| Mix Ratio By Volume | 2A:1B | — |
| Mix Ratio By Weight | 100A:42B | 80A:100B |
| Pot Life | 10 minutes | 30 seconds |
| Thin Film Working Time | 20 minutes | — |
| Thin Film Recoat Time | 90 minutes | — |
| Tack Free Time | 2 hours | — |
| Handling Time | — | 45 minutes |
| Cure Time | 3.5 hours | 2 hours |
| Shore D Hardness | 80 | — |
| Expansion (approximate) | — | 13 times |
| Foam Density | — | 4 lb/ft³ |
| Specific Gravity | 1.09 g/cc | 0.06 g/cc |
| Specific Volume | 25.1 cu. in./lb. | 420 cu. in./lb. |
| Color | Clear (Slightly Yellow In Thick Sections) | White |
Product Description
XTC-3D™
XTC-3D™ is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D™ cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.
FlexFoam-iT!™ IV Tuff Stuff
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties.