C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 350 cps | 23,000 cps |
| Pot Life | 10 minutes | 20 minutes |
| Cure Time | 3.5 hours | 5 hours |
| Shore D Hardness | 80 | — |
| Shore A Hardness | — | 10 |
| Color | Clear (Slightly Yellow In Thick Sections) | Translucent |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| XTC-3D™ | Dragon Skin™ 10 AF Anti Fungal | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 350 cps | 23,000 cps |
| Mix Ratio By Volume | 2A:1B | 1A:1B |
| Mix Ratio By Weight | 100A:42B | 1A:1B |
| Pot Life | 10 minutes | 20 minutes |
| Thin Film Working Time | 20 minutes | — |
| Thin Film Recoat Time | 90 minutes | — |
| Tack Free Time | 2 hours | — |
| Cure Time | 3.5 hours | 5 hours |
| Shore D Hardness | 80 | — |
| Shore A Hardness | — | 10 |
| Specific Gravity | 1.09 g/cc | 1.07 g/cc |
| Specific Volume | 25.1 cu. in./lb. | 25.8 cu. in./lb. |
| Color | Clear (Slightly Yellow In Thick Sections) | Translucent |
| Die B Tear Strength | — | 102 pli |
| Tensile Strength | — | 475 psi |
| Elongation @ Break | — | 1,000 % |
| 100% Modulus | — | 22 psi |
| Shrinkage | — | <.001 in. / in. |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 450 °F |
| Dielectric Strength | — | >350 volts/mil |
Product Description
XTC-3D™
XTC-3D™ is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D™ cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.
Dragon Skin™ 10 AF Anti Fungal
Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C)