C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 350 cps | 3,000 cps |
| Pot Life | 10 minutes | 45 minutes |
| Shore D Hardness | 80 | — |
| Shore A Hardness | — | 00-30 |
| Color | Clear (Slightly Yellow In Thick Sections) | Translucent |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| XTC-3D™ | Ecoflex™ 00-30 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 350 cps | 3,000 cps |
| Mix Ratio By Volume | 2A:1B | 1A:1B |
| Mix Ratio By Weight | 100A:42B | 1A:1B |
| Pot Life | 10 minutes | 45 minutes |
| Thin Film Working Time | 20 minutes | — |
| Thin Film Recoat Time | 90 minutes | — |
| Tack Free Time | 2 hours | — |
| Cure Time | 3.5 hours | 4 hours |
| Shore D Hardness | 80 | — |
| Shore A Hardness | — | 00-30 |
| Specific Gravity | 1.09 g/cc | 1.07 g/cc |
| Specific Volume | 25.1 cu. in./lb. | 26.0 cu. in./lb. |
| Color | Clear (Slightly Yellow In Thick Sections) | Translucent |
| Die B Tear Strength | — | 38 pli |
| Tensile Strength | — | 200 psi |
| Elongation @ Break | — | 900 % |
| 100% Modulus | — | 10 psi |
| Shrinkage | — | <.001 in. / in. |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 450 °F |
Product Description
XTC-3D™
XTC-3D™ is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D™ cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.
Ecoflex™ 00-30
Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage. Low viscosity ensures easy mixing and de-airing. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.
Certified Skin Safe - Cured Ecoflex™ 00-30 is skin safe and certified by an independent laboratory.