C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 2,000 cps | 1,200 cps |
| Pot Life | 60 minutes | 240 minutes |
| Cure Time | 16 hours | 24 hours |
| Shore A Hardness | 50 | 15 |
| Color | Off-White | Clear |
| Tensile Strength | 588 psi | 180 psi |
| Elongation @ Break | 400 % | 290 % |
| 100% Modulus | 215 psi | 25 psi |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| VytaFlex™ 50 | Solaris™ | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 2,000 cps | 1,200 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 1A:1B | 1A:1B |
| Pot Life | 60 minutes | 240 minutes |
| Cure Time | 16 hours | 24 hours |
| Shore A Hardness | 50 | 15 |
| Specific Gravity | 1.04 g/cc | 0.99 g/cc |
| Specific Volume | 26.7 cu. in./lb. | 28.1 cu. in./lb. |
| Color | Off-White | Clear |
| Die C Tear Strength | 102 pli | — |
| Tensile Strength | 588 psi | 180 psi |
| Elongation @ Break | 400 % | 290 % |
| 100% Modulus | 215 psi | 25 psi |
| Shrinkage | <.001 in. / in. | <.001 in. / in. |
| Useful Temperature (min) | — | -149 °F |
| Useful Temperature (max) | — | 400 °F |
| Dielectric Constant, 100Hz | — | 2.78 |
| Dielectric Strength | — | 366 volts/mil |
| Dissipation Factor, 100Hz | — | 0.00 |
| Index of Refraction at 20°C | — | 1.41 |
| Thermal Conductivity | — | 0.18 W/M*K |
| Volume Resistivity | — | 3.16E+15 ohm/cm |
Product Description
VytaFlex™ 50
Using Smooth-On’s exclusive “V-Polymer™” technology, VytaFlex™ urethane rubbers offer superior physical and performance properties for casting concrete. VytaFlex™ urethanes are available in 10A, 20A, 30A, 40A, 45A, 50A and 60A Shore hardness’s and feature convenient one-to-one by volume mix ratios.
Vacuum degassing is not necessary and VytaFlex™ rubbers cure with negligible shrinkage to a durable rubber that will last in production.
VytaFlex™ mold rubbers work especially well for casting pigmented / colored concrete. Molds made with VytaFlex™ Series urethanes will render accurate and uniform colored castings.
FOR COMMERCIAL/INDUSTRIAL USE ONLY
› Click here for more VytaFlex™ rubber products.
Solaris™
Solaris™ is a low viscosity, clear and colorless liquid platinum cure silicone rubber compound designed for use in protecting of electronic components and other assemblies. It will protect components against shock, vibration, moisture, ozone, dust, chemicals and other environmental hazards.