C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mix Ratio By Volume | 1A:1B | N/A (gram scale required) |
| Pot Life | 30 minutes | 20 minutes |
| Shore D Hardness | — | 60 |
| Shore A Hardness | 30 | — |
| Color | Clear Amber | Translucent White |
| Tensile Strength | 400 psi | 2,500 psi |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| PMC™-121 30/WET | TASK™ 11 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,800 cps | 2,000 cps |
| Mix Ratio By Volume | 1A:1B | — |
| Mix Ratio By Weight | 1A:1B | 100A:100B |
| Pot Life | 30 minutes | 20 minutes |
| Cure Time | 16 hours | 16 hours |
| Shore D Hardness | — | 60 |
| Shore A Hardness | 30 | — |
| Specific Gravity | 1.04 g/cc | 1.12 g/cc |
| Specific Volume | 26.7 cu. in./lb. | 24.7 cu. in./lb. |
| Color | Clear Amber | Translucent White |
| Die C Tear Strength | 75 pli | — |
| Tensile Strength | 400 psi | 2,500 psi |
| Elongation @ Break | 1,000 % | 100 % |
| 100% Modulus | 82 psi | — |
| Shrinkage | < .001 in. / in. | 0.0024 in. / in. |
Product Description
PMC™-121 30/WET
The PMC™-121 Series urethane rubbers feature convenient one-to-one by volume mix ratios. PMC™-121/30 Wet is exceptionally strong and abrasion resistant for soft urethane mold rubbers. It exudes oil that aids in demolding hard plasters and concrete.
TASK™ 11
TASK™ 11 urethane casting resin is a semi-rigid plastic (has some flexibility) that is strong and very tough. Originally developed for high impact tooling (drop hammer punch), TASK™ 11 also offers good abrasion and chemical resistance and is ideal for a variety of industrial applications.
This product is suitable for some FDA/USDA applications - dry food contact only.
TASK™ 11 applications include making abrasion resistant parts, foundry patterns, encapsulation, roller facings, metal bonding and vibration pads.