Product Type |
|
|
Mixed Viscosity | 1,100 cps | Dough |
Pot Life | 4 minutes | 90 minutes |
Cure Time | 48 hours | 24 hours |
Shore A Hardness | 60 | 90 |
Specific Volume | 25.7 cu. in./lb. | 17.9 cu. in./lb. |
Color | White | Light Brown |
Simpact™ 60A | Free Form™ Habitat™ Flex FR | |
---|---|---|
Product Type |
|
|
Mixed Viscosity | 1,100 cps | Dough |
Mix Ratio By Volume | 1A:1B | 1A:1B |
Mix Ratio By Weight | 100A:94B | 1A:1B |
Pot Life | 4 minutes | 90 minutes |
Handling Time | 2 hours | — |
Cure Time | 48 hours | 24 hours |
Shore A Hardness | 60 | 90 |
Specific Gravity | 1.08 g/cc | 1.55 g/cc |
Specific Volume | 25.7 cu. in./lb. | 17.9 cu. in./lb. |
Color | White | Light Brown |
Die C Tear Strength | 142 pli | — |
Tensile Strength | 990 psi | — |
Elongation @ Break | 400 % | — |
100% Modulus | 312 psi | — |
Shrinkage | <.007 in. / in. | — |
Simpact™ 60A urethane is a low odor, fast-setting urethane elastomer which offers very high tear strength, impact resistance and wear resistance. Simpact™ urethanes are phthalate free, mercury free and MOCA free. Simpact™ urethanes pour easily. Working time is 4 minutes, handling time is 2 hours and full cure time is 48 hours at room temperature.
Cured rubber has exceptional performance characteristics and dimensional stability. Simpact™ urethanes can be colored with SO-Strong™, UVO™ or Ignite™ colorants. Simpact™ urethanes are suitable for making impact resistant props, prototypes and display pieces.
This material may congeal if exposed to cold temperatures. To reconstitute, Part A & B must be heated to 90°F (33°C) then thoroughly mixed to an even consistency.
Free Form™ Habitat™ Flex FR Epoxy Putty is a mix-and-apply-by-hand putty that is that is certified flame resistant (E84, Class A) and is used to create display elements that are semi-rigid and extremely tough. It is also used for industrial bonding applications. Habitat™ Flex FR is solvent free and contains no VOC’s. Working time is 90 minutes and handling time is 24 hours at room temperature (73°F/23°C). Cured epoxy has some flexibility with excellent impact resistance and abrasion resistance.
Habitat™ Flex FR forms a permanent bond to a variety of surfaces including foam, steel and stainless steel, wood, PVC, ABS plastic, concrete and more. It withstands freeze/thaw cycles for exterior applications. When using as an adhesive do not use folding powder. It is easy to paint with acrylic paints or stains. Use to make perfectly detailed tree branches, planks and other themed elements for zoos and amusement parks. Because finished elements are semirigid, reptiles and birds can comfortably grip them without affecting the material.
Use with or without Habitat™ Folding Powder™ – mix equal parts A+B and apply Habitat™ Flex FR. For thickening, add Folding Powder™ into epoxy putty. Folding Powder™ reduces stickiness and makes the epoxy more handleable. Once putty is applied, it can be stamped with a silicone rubber stamp to create repeating patterns with intricate detail over a large surface area. Surface can be smoothed with alcohol or water. New Habitat™ Flex FR will bond to cured Habitat™ Flex FR without delamination.