C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 1,100 cps | 150 cps |
| Pot Life | 4 minutes | 120 minutes |
| Cure Time | 48 hours | 16 hours |
| Shore A Hardness | 60 | 33 |
| Color | White | Clear |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Simpact™ 60A | Rubber Glass™ | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,100 cps | 150 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 100A:94B | 1A:1B |
| Pot Life | 4 minutes | 120 minutes |
| Handling Time | 2 hours | — |
| Cure Time | 48 hours | 16 hours |
| Shore A Hardness | 60 | 33 |
| Specific Gravity | 1.08 g/cc | 0.97 g/cc |
| Specific Volume | 25.7 cu. in./lb. | 28.6 cu. in./lb. |
| Color | White | Clear |
| Die C Tear Strength | 142 pli | — |
| Tensile Strength | 990 psi | — |
| Elongation @ Break | 400 % | — |
| 100% Modulus | 312 psi | — |
| Shrinkage | <.007 in. / in. | <.001 in. / in. |
| Dielectric Constant, 100Hz | — | 3.17 |
| Dielectric Strength | — | 319 volts/mil |
Product Description
Simpact™ 60A
Simpact™ 60A urethane is a low odor, fast-setting urethane elastomer which offers very high tear strength, impact resistance and wear resistance. Simpact™ urethanes are phthalate free, mercury free and MOCA free. Simpact™ urethanes pour easily. Working time is 4 minutes, handling time is 2 hours and full cure time is 48 hours at room temperature.
Cured rubber has exceptional performance characteristics and dimensional stability. Simpact™ urethanes can be colored with SO-Strong™, UVO™ or Ignite™ colorants. Simpact™ urethanes are suitable for making impact resistant props, prototypes and display pieces.
This material may congeal if exposed to cold temperatures. To reconstitute, Part A & B must be heated to 90°F (33°C) then thoroughly mixed to an even consistency.
› Click here for more Simpact™ products.
Rubber Glass™
Rubber Glass™ is a platinum-catalyzed silicone rubber product developed specifically for special effects and display applications. Two liquids (1 Part A + 1 Part B) are mixed together and poured into a container.
The mixture cures overnight to a solid water clear rubber that can then be easily broken or “crumbled” into pieces that look exactly like broken glass, ice or diamonds. Vibrant colors are possible by adding Silc-Pig™ liquid color pigments.
Rubber Glass™ can be used to create a variety of special effects (i.e. simulated broken glass where human contact is required) and model effects (i.e. simulated ice or water). It can also be used for electronic encapsulation applications.