C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 150 cps | 1,000 cps |
| Pot Life | 7 minutes | 60 seconds |
| Cure Time | 60 minutes | 2 hours |
| Shore D Hardness | 80 | — |
| Specific Volume | 24.7 cu. in./lb. | 93 cu. in./lb. |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| TASK™ 2 | FlexFoam-iT!™ 17 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 150 cps | 1,000 cps |
| Mix Ratio By Volume | 1A:1B | 1A:2B |
| Mix Ratio By Weight | 115A:100B | 100A:185B |
| Pot Life | 7 minutes | 60 seconds |
| Handling Time | — | 30 minutes |
| Cure Time | 60 minutes | 2 hours |
| Shore D Hardness | 80 | — |
| Expansion (approximate) | — | 3.5 times |
| Foam Density | — | 17 lb/ft³ |
| Specific Gravity | 1.12 g/cc | 0.27 g/cc |
| Specific Volume | 24.7 cu. in./lb. | 93 cu. in./lb. |
| Color | White | White |
| Tensile Strength | 6,650 psi | — |
| Tensile Modulus | 290,000 psi | — |
| Elongation @ Break | 6 % | — |
| Compressive Strength | 8,300 psi | — |
| Compressive Modulus | 78,000 psi | — |
| Flexural Strength | 9,500 psi | — |
| Flexural Modulus | 288,000 psi | — |
| Shrinkage | 0.005 in. / in. | — |
| Heat Deflection Temp | 134 °F | — |
Product Description
TASK™ 2
TASK™ 2 low viscosity, high performance casting resins offer superior physical and performance properties compared to our popular Smooth-Cast™ Series of general purpose casting resins. Vacuum degassing is not necessary and it offers the convenience of a 1A:1B by volume (115A:100B by weight) mix ratio.
TASK™ 2 is white. It has high tensile and flexural strength, as well as high flexural modulus. This plastic was formulated for a variety of industrial applications including pattern making and making prototype models. This resin is designed for casting in thicknesses up to ½” (1.27 cm). TASK™ Plastics are moderately priced and are available in trial kits, one-gallon, five-gallon, 55-gallon drum and totes.
› Click here for more TASK™ resin products.
FlexFoam-iT!™ 17
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties. The lower the number, the more the foam expands.