C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 150 cps | 23,000 cps |
| Pot Life | 7 minutes | 20 minutes |
| Cure Time | 60 minutes | 5 hours |
| Shore D Hardness | 80 | — |
| Shore A Hardness | — | 10 |
| Color | White | Translucent |
| Tensile Strength | 6,650 psi | 475 psi |
| Elongation @ Break | 6 % | 1,000 % |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| TASK™ 2 | Dragon Skin™ 10 AF Anti Fungal | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 150 cps | 23,000 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 115A:100B | 1A:1B |
| Pot Life | 7 minutes | 20 minutes |
| Cure Time | 60 minutes | 5 hours |
| Shore D Hardness | 80 | — |
| Shore A Hardness | — | 10 |
| Specific Gravity | 1.12 g/cc | 1.07 g/cc |
| Specific Volume | 24.7 cu. in./lb. | 25.8 cu. in./lb. |
| Color | White | Translucent |
| Die B Tear Strength | — | 102 pli |
| Tensile Strength | 6,650 psi | 475 psi |
| Tensile Modulus | 290,000 psi | — |
| Elongation @ Break | 6 % | 1,000 % |
| 100% Modulus | — | 22 psi |
| Compressive Strength | 8,300 psi | — |
| Compressive Modulus | 78,000 psi | — |
| Flexural Strength | 9,500 psi | — |
| Flexural Modulus | 288,000 psi | — |
| Shrinkage | 0.005 in. / in. | <.001 in. / in. |
| Heat Deflection Temp | 134 °F | — |
| Useful Temperature (min) | — | -65 °F |
| Useful Temperature (max) | — | 450 °F |
| Dielectric Strength | — | >350 volts/mil |
Product Description
TASK™ 2
TASK™ 2 low viscosity, high performance casting resins offer superior physical and performance properties compared to our popular Smooth-Cast™ Series of general purpose casting resins. Vacuum degassing is not necessary and it offers the convenience of a 1A:1B by volume (115A:100B by weight) mix ratio.
TASK™ 2 is white. It has high tensile and flexural strength, as well as high flexural modulus. This plastic was formulated for a variety of industrial applications including pattern making and making prototype models. This resin is designed for casting in thicknesses up to ½” (1.27 cm). TASK™ Plastics are moderately priced and are available in trial kits, one-gallon, five-gallon, 55-gallon drum and totes.
› Click here for more TASK™ resin products.
Dragon Skin™ 10 AF Anti Fungal
Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C)