How To Use PC‑3™ To Install a Lab Countertop
Step 2: Applying PC‑3
Next, apply PC-3 epoxy to the seams between the two adjoining sections of countertop. Press the sections together and excess epoxy material should rise from the seam. Use clamps to hold the countertop sections together and a putty knife to spread out and remove excess PC-3. Use a dampened cloth to further clean uncured material from the seams.
To apply a backsplash section, mix and apply a small amount of PC-3 to the joint and wall surface, then press the backsplash section into place. Use a putty knife to spread the PC-3.
