How To Shrink a Casting using NOVOCS Silicone Solvent
Step 2: Using Mold Star™ & NOVOCS
Mold Star™ 16 will be used in this project because of its quick setup and demold times. NOVOCS™ is a silicone solvent that does not contain VOC’s. Mold Star™ Parts A and B are dispensed in equal amounts. 2 parts of NOVOCS™ are dispensed. Proportions are 1A:1B:2 parts NOVOCS™. All components are mixed thoroughly for 3 minutes. Viscosity of the mixture will be very low.
Silicone is then poured over the model and allowed to cure for 2 hours.
