C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 2,000 cps | 150 cps |
| Pot Life | 60 minutes | 20 minutes |
| Cure Time | 16 hours | 90 minutes |
| Shore D Hardness | — | 80 |
| Shore A Hardness | 60 | — |
| Color | Off-White | White |
| Tensile Strength | 880 psi | 6,650 psi |
| Elongation @ Break | 480 % | 6 % |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| VytaFlex™ 60 | TASK™ 3 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 2,000 cps | 150 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 1A:1B | 115A:100B |
| Pot Life | 60 minutes | 20 minutes |
| Cure Time | 16 hours | 90 minutes |
| Shore D Hardness | — | 80 |
| Shore A Hardness | 60 | — |
| Specific Gravity | 1.04 g/cc | 1.12 g/cc |
| Specific Volume | 26.6 cu. in./lb. | 24.7 cu. in./lb. |
| Color | Off-White | White |
| Die C Tear Strength | 136 pli | — |
| Tensile Strength | 880 psi | 6,650 psi |
| Tensile Modulus | — | 290,000 psi |
| Elongation @ Break | 480 % | 6 % |
| 100% Modulus | 300 psi | — |
| Compressive Strength | — | 8,300 psi |
| Compressive Modulus | — | 78,000 psi |
| Flexural Strength | — | 9,500 psi |
| Flexural Modulus | — | 288,000 psi |
| Shrinkage | <0.001 in. / in. | 0.0025 in. / in. |
| Heat Deflection Temp | — | 134 °F |
Product Description
VytaFlex™ 60
Using Smooth-On’s exclusive “V-Polymer™” technology, VytaFlex™ urethane rubbers offer superior physical and performance properties for casting concrete. VytaFlex™ urethanes are available in 10A, 20A, 30A, 40A, 45A, 50A and 60A Shore hardness’s and feature convenient one-to-one by volume mix ratios.
Vacuum degassing is not necessary and VytaFlex™ rubbers cure with negligible shrinkage to a durable rubber that will last in production.
VytaFlex™ mold rubbers work especially well for casting pigmented / colored concrete. Molds made with VytaFlex™ Series urethanes will render accurate and uniform colored castings.
FOR COMMERCIAL/INDUSTRIAL USE ONLY
› Click here for more VytaFlex™ rubber products.
TASK™ 3
TASK™ 3 low viscosity, high performance casting resin offers superior physical and performance properties compared to our popular Smooth-Cast™ Series of general purpose casting resins. Vacuum degassing is not necessary and it offers the convenience of a 1A:1B by volume (115A:100B by weight) mix ratio.
TASK™ 3 is white. It has high tensile and flexural strength, as well as high flexural modulus. This plastic was formulated for a variety of industrial applications including pattern making and making prototype models. This resin is designed for casting in thicknesses up to ½” (1.27 cm). TASK™ Plastics are moderately priced and are available in trial kits, one-gallon, five-gallon, 55-gallon drum and totes.