How To Make a 2 Part Silicone Mold Using Mold Max™ 25

Step 3: Inverting mold and Preparing for Part 2 of Mold Max 25

After curing, the box is disassembled. The clay divides the mold in half. The mold is inverted and the base board is removed. The clay and acorn nuts (registration keys) are removed. The second half of the rubber mold will be made over the reverse side of the model now embedded in silicone.

The mold box is reassembled using screws. Ease Release® 200 is sprayed on all surfaces. Ease Release® 200 will keep the new silicone from sticking to the cured silicone. A funnel is added to the model using a small piece of clay. This funnel will make it easier to pour resin into the finished mold.

 Previous: Applying Mold Max 25 Next: Applying Mold Max 25