How to Use TASK™ 16 Rubber for Impact Resistant Bumpers
Step 3: Mold Making With Mold Star 30
Mold Star® 30 is chosen for its ease of use and dimensional stability. Mold Star® 30 is measure 1:1 by volume. Mold Star® 30 is mixed and poured into a new clean container to be mixed again.
The silicone is vacuumed at 29 inches of mercury to extract any bubbles created from mixing. Then the Mold Star® is poured into the mold box in a long thin stream.
Once mold is filled, it is allowed to cure for 6 hours. The cured mold is ready for demold.
