How To Make a Brush‑On Mold with a Lightweight Support

Step 4: Dispensing and Applying Rebound™ 25 with Thi‑Vex

Measure and mix a small amount of Rebound™ 25 A+B. Add 4 drops of Thi-Vex thickener to every 1 oz. of mixed Rebound™ 25. Use the thickened rubber to build up sections for support. The top of the mold is reinforced.

‹ Previous: Dispensing and Applying 'Second Layer' of Rebound™ 25 Next: Dispensing and Applying 'Third and Fourth Layers" of Rebound™ 25 ›