How To Make a Prop Rattlesnake Using Dragon Skin™ Silicone

Step 1: Preparing the Rebound 25 Mold

Begin with a Rebound™ 25 brush-on mold with a 2-piece support shell. Flex the mold inside out to make applying the release agent much easier, and then spray Ease-Release® 200 evenly onto the mold surface. Due to the extreme detail of the scales in this example, the release agent was then brushed into the nooks and crannies of all the scales.

The mold is then seated properly back into the support shell.

 Back to Overview Next: Dispensing, Mixing, Vacuuming and Pouring Dragon Skin 10 Medium