How To Make a Breakaway Glass Window Pane

Step 4: Pouring the Mold Rubber

Before pouring the rubber, we remove the protective coating from the other side of the clear acrylic sheet. Pour Mold Max 30 into the center of the model. The rubber thickness should be 1/8” / 0.32cm - we can check it with a stick from a cotton swab. Let the mold rubber cure for 16 hours at room temperature (72 F / 23 C)

 Previous: Mixing Mold Max Mold Rubber Next: Demolding and Post Curing the Rubber Mold