How To Mold a Captain America Cosplay Helmet Using Rebound™ 25

Step 2: Dispensing and Applying Rebound 40 (Second Layer)

For the second layer, measure equal Parts A and B and add SO-Strong Black to color it. Mix thoroughly until there are no color streaks. Adding a color to every other layer will help distinguish between layers and ensure thorough coverage. Apply a thin layer over the partially cured layer. Apply at least 3 - 4 total layers of rubber until the mold walls are at least 3/8 inch in thickness.

 Previous: Preparing, Dispensing and Applying Rebound 40 Next: Making Registration Keys